General Specification Designer : Johan Anker (1929, Norway) Builder : Børresens Bådebyggeri, Vjile, Denmark LOA : 8.9m (29ft 2in) Beam : 1.95m (6ft 5in) Draft : 1.2m (3ft 11in) Displacement : 1,700kg Keel : Long Construction Wood carvel construction Mahogany on oak frames Varnish topsides with black antifouling A full and meticulous restoration job undertaken in 2023 She now looks incredible with gleaming varnished topsides, fared hull and fully repainted interior as well as being in excellent structural shape! Completed works include: New ring frames and ... read more

General Specification Designer: Dennis Rayner Builder: Westerly Marine Construction Ltd. (UK) LOA: 6.78m (22ft 3in) LOD: 6.78m (22ft 3in) LWL: 5.59m (18ft 4in) Beam: 2.26m (7ft 5in) Draft max: 0.69m (2ft 3in) Maximum headroom: 1.80m ( 5ft 11in) Displacement: 1432kg Keel: Bilge/Twin Construction GRP hull and superstructure Original gelcoat finish to hull Topsides professionally painted with two pack (2020) Painted non-slip decks Stainless steel keel bolts Self Draining cockpit Anchor locker Storage locker Last surveyed August 2020 Maintenance history bills can be s... read more

General Specification Designer: Bruce Roberts Builder: Believed to be Linden Yachts LOA: 13.18m (43ft 3in) Beam: 3.96m (13ft 0in) Draft max: 1.8m (5ft 11in) Keel: Long fin Construction GRP construction Painted hull above waterline with black antifouling below Centre Cockpit Stretched to 47ft (at bow) Spacious lazarette Encapsulated keel of ballast, fuel and water tanks Mechanical & Electrical BMW D-50 45hp diesel engine (refurbished March 2024) Engine last serviced February 2024 New fuel tank approx. 135l mild steel tank coated with heat retardant GRP (Nove... read more

General Specification Builder : Alfred Pegg of Wroxham LOA : 8.53m (28ft 0in) LOD : 7.32m (24ft 0in) Beam : 2.36m (7ft 9in) Draft : 0.94m (3ft 1in) Keel : Fin Construction Hull Below water line carvel planked Hull above waterline splined planked Lifting cabin roof Extensive and sympathetic renovation works done over last 2 years Focusing on keeping originality throughout and only components beyond repair being replaced. She is now in excellent structural condition! Completed works include: Six planks below water line replaced with Siberian Larch Waney edged 0/1 Grade su... read more

General Specification Designer : Gordon Harris Builder : Pegasus Yachts, Oulton Broad LOA : 7.85m (25ft 9in) LWL : 6.4m (21ft 0in) Beam : 2.67m (8ft 9in) Draft : 1m (3ft 3in) Displacement : 2,000kg Ballast : 860kg Keel : Centreboard Construction GRP construction Original gelcoat finish throughout Lifting keel New keel bolts 2005 Non slip decks Self draining cockpit Anchor locker Wintered ashore annually No known signs of osmosis 2021 Pre-Purchase Inspection Report. Available to view below Rigging & Sails Fractional Bermudan Sloop rig Alloy mast/spar... read more

General Specification Designer : Mike Barnes Builder : Maynard Watson & Mike Barnes LOA : 4.83m (15ft 10in) Beam : 1.65m (5ft 5in) Draft : 0.61m (2ft 0in) Construction GRP simulated Victorian clinker hull Original polished black gelcoat finish in as new condition Red antifouling Teak laid deck Oiled/varnished teak furnishings Sealed internal buoyancy compartments All stainless steel fittings Mechanical & Electrical 2015 Nanni 14hp diesel engine (approx 100 hours from new) Single lever control 25L Nylon fuel tank Tiller Steering 12V Battery Equipment ... read more

General Specification Designer :JW& A Upham Builder :Upham's of Brixham LOA :7.52m (24ft 8in) LWL:6.63m (21ft 9in) Beam :2.57m (8ft 5in) Draft min:1.42m (4ft 8in) Maximum headroom:1.83m ( 6ft 0in) Keel :Deep Keel Construction Wooden carvel construction Painted finish Timber sheathed and painted decks Self draining cockpit Wintered ashore annually Mechanical & Electrical Bukh DV10 – 10hp diesel engine (last serviced 2024) Full engine service 2024 including new cylinder head gasket, fuel injector service, exhaust elbow, fuel and oil filters. Pl... read more

General Specification Designer :Neil Hunt Builder :Easticks, Acle LOA :10.06m (33ft 0in) LOD :8.53m (28ft 0in) Beam :2.59m (8ft 6in) Draft min:1.21m (4ft 0in) Keel :Fin Construction Composite construction GRP hull in original gelcoat finish GRP decks Wood superstructure Cockpit bulkhead refaced and varnished 2022 Full lifting cabin roof Hull cleaned & antifouled 2023 Mechanical & Electrical Volvo Penta 9hp diesel inboard single cylinder engine Last serviced 2023 20L plastic fuel tank Single lever control 2 x 12V batteries (1 starter & 1 leisure ... read more

General Specification Designer :David Thomas Builder :Hunter Boats LOA :7.47m (24ft 6in) LWL:6.40m (21ft 0in) Beam :2.67m (8ft 9in) Construction GRP construction Original gelcoat finish in very good condition Anchor locker Anode replaced 2022 Wintered ashore annually Last surveyed 2016 Last antifouled 2023 Vessel is currently ashore and will remain so until sold Mechanical & Electrical New Yanmar 1GM10 inboard diesel engine (2018, circa 200 hours) Engine serviced annually (last serviced 2023, not used in 2024 season) 25l fuel tank Shore power with power po... read more

General Specification Designer : Van de Stadt Builder : Tyler Boat Company (Tonbridge, Kent) LOA :12.8m (42ft 0in) LWL:9.14m (30ft 0in) Beam :3.35m (11ft 0in) Draft min:2.13m (7ft 0in) Displacement :11000kg Keel :Long Fin Construction GRP hull (epoxied) & superstructure Cast iron moulded in keel Hull constructed circa 1970 by Tyler, Tonbridge Fitting out completed 1990 Solid GRP decks with non-slip side decks & cabin top Self-draining cockpit Square transom with self-steering gear fitted Antifouled March 2024 (Red) Last surveyed February 2024 (copy att... read more